# Makefile.in generated by automake 1.7.9 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Some common rules for building gnumeric docs. # These will be changed as the documentation format changes # but it is a start. # # Requires that the calling makefile define 'lang' # # No modifications of this Makefile should be necessary. # # To use this template: # 1) Define: figdir, docname, lang, omffile, and entities in # your Makefile.am file for each document directory, # although figdir, omffile, and entities may be empty # 2) Make sure the Makefile in (1) also includes # "include $(top_srcdir)/xmldocs.make" and # "dist-hook: app-dist-hook". # 3) Optionally define 'entities' to hold xml entities which # you would also like installed # 4) Figures must go under $(figdir)/ and be in PNG format # 5) You should only have one document per directory # 6) Note that the figure directory, $(figdir)/, should not have its # own Makefile since this Makefile installs those figures. # # example Makefile.am: # figdir = figures # docname = scrollkeeper-manual # lang = C # omffile=scrollkeeper-manual-C.omf # entities = fdl.xml # include $(top_srcdir)/xmldocs.make # dist-hook: app-dist-hook # # About this file: # This file was taken from scrollkeeper_example2, a package illustrating # how to install documentation and OMF files for use with ScrollKeeper # 0.3.x and 0.4.x. For more information, see: # http://scrollkeeper.sourceforge.net/ # Version: 0.1.2 (last updated: March 20, 2002) # # # No modifications of this Makefile should be necessary. # # This file contains the build instructions for installing OMF files. It is # generally called from the makefiles for particular formats of documentation. # # Note that you must configure your package with --localstatedir=/var # so that the scrollkeeper-update command below will update the database # in the standard scrollkeeper directory. # # If it is impossible to configure with --localstatedir=/var, then # modify the definition of scrollkeeper_localstate_dir so that # it points to the correct location. Note that you must still use # $(localstatedir) in this or when people build RPMs it will update # the real database on their system instead of the one under RPM_BUILD_ROOT. # # Note: This make file is not incorporated into xmldocs.make because, in # general, there will be other documents install besides XML documents # and the makefiles for these formats should also include this file. # # About this file: # This file was derived from scrollkeeper_example2, a package # illustrating how to install documentation and OMF files for use with # ScrollKeeper 0.3.x and 0.4.x. For more information, see: # http://scrollkeeper.sourceforge.net/ # Version: 0.1.3 (last updated: March 20, 2002) # srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_triplet = @host@ ACLOCAL = @ACLOCAL@ ACLOCAL_FLAGS = @ACLOCAL_FLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CORBA_LIBS_CFLAGS = @CORBA_LIBS_CFLAGS@ CORBA_LIBS_LIBS = @CORBA_LIBS_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_SOLVER_FALSE = @ENABLE_SOLVER_FALSE@ ENABLE_SOLVER_TRUE = @ENABLE_SOLVER_TRUE@ ENABLE_SSCONVERT_FALSE = @ENABLE_SSCONVERT_FALSE@ ENABLE_SSCONVERT_TRUE = @ENABLE_SSCONVERT_TRUE@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GB_CFLAGS = @GB_CFLAGS@ GB_LIBS = @GB_LIBS@ GCONFTOOL = @GCONFTOOL@ GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ GDA_CFLAGS = @GDA_CFLAGS@ GDA_LIBS = @GDA_LIBS@ GDK_PIXBUF_CSOURCE = @GDK_PIXBUF_CSOURCE@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOMEDB_CFLAGS = @GNOMEDB_CFLAGS@ GNOMEDB_LIBS = @GNOMEDB_LIBS@ GNOME_CFLAGS = @GNOME_CFLAGS@ GNOME_LIBS = @GNOME_LIBS@ GNUMERIC_CFLAGS = @GNUMERIC_CFLAGS@ GNUMERIC_LIBS = @GNUMERIC_LIBS@ GNUMERIC_PLUGIN_LDFLAGS = @GNUMERIC_PLUGIN_LDFLAGS@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ GUILE_INCS = @GUILE_INCS@ GUILE_LIBS = @GUILE_LIBS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MONO_CFLAGS = @MONO_CFLAGS@ MONO_LIBS = @MONO_LIBS@ MSGFMT = @MSGFMT@ OBJEXT = @OBJEXT@ ORBIT_IDL = @ORBIT_IDL@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARADOX_CFLAGS = @PARADOX_CFLAGS@ PARADOX_LIBS = @PARADOX_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PERL_CC = @PERL_CC@ PERL_CCCDLFLAGS = @PERL_CCCDLFLAGS@ PERL_CCOPTS = @PERL_CCOPTS@ PERL_LD = @PERL_LD@ PERL_LDDLFLAGS = @PERL_LDDLFLAGS@ PERL_LDOPTS = @PERL_LDOPTS@ PKG_CONFIG = @PKG_CONFIG@ PLUGIN_LIST = @PLUGIN_LIST@ PLUGIN_LIST_GIVEN_FALSE = @PLUGIN_LIST_GIVEN_FALSE@ PLUGIN_LIST_GIVEN_TRUE = @PLUGIN_LIST_GIVEN_TRUE@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ PSICONV_CFLAGS = @PSICONV_CFLAGS@ PSICONV_CONFIG = @PSICONV_CONFIG@ PSICONV_LIBS = @PSICONV_LIBS@ PYGTK_CFLAGS = @PYGTK_CFLAGS@ PYGTK_LIBS = @PYGTK_LIBS@ PYTHON = @PYTHON@ PY_CFLAGS = @PY_CFLAGS@ PY_EXTRA_LIBS = @PY_EXTRA_LIBS@ PY_LIBS = @PY_LIBS@ PY_LIB_LOC = @PY_LIB_LOC@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ STRIP_BEGIN = @STRIP_BEGIN@ STRIP_DUMMY = @STRIP_DUMMY@ STRIP_END = @STRIP_END@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARN_CFLAGS = @WARN_CFLAGS@ WINDRES = @WINDRES@ WITH_CORBA_FALSE = @WITH_CORBA_FALSE@ WITH_CORBA_TRUE = @WITH_CORBA_TRUE@ WITH_GB_FALSE = @WITH_GB_FALSE@ WITH_GB_TRUE = @WITH_GB_TRUE@ WITH_GDA_FALSE = @WITH_GDA_FALSE@ WITH_GDA_TRUE = @WITH_GDA_TRUE@ WITH_GNOMEDB_FALSE = @WITH_GNOMEDB_FALSE@ WITH_GNOMEDB_TRUE = @WITH_GNOMEDB_TRUE@ WITH_GNOME_FALSE = @WITH_GNOME_FALSE@ WITH_GNOME_TRUE = @WITH_GNOME_TRUE@ WITH_GTK_FALSE = @WITH_GTK_FALSE@ WITH_GTK_TRUE = @WITH_GTK_TRUE@ WITH_GUILE_FALSE = @WITH_GUILE_FALSE@ WITH_GUILE_TRUE = @WITH_GUILE_TRUE@ WITH_MONO_FALSE = @WITH_MONO_FALSE@ WITH_MONO_TRUE = @WITH_MONO_TRUE@ WITH_PARADOX_FALSE = @WITH_PARADOX_FALSE@ WITH_PARADOX_TRUE = @WITH_PARADOX_TRUE@ WITH_PERL_FALSE = @WITH_PERL_FALSE@ WITH_PERL_TRUE = @WITH_PERL_TRUE@ WITH_PSICONV_FALSE = @WITH_PSICONV_FALSE@ WITH_PSICONV_TRUE = @WITH_PSICONV_TRUE@ WITH_PYTHON_FALSE = @WITH_PYTHON_FALSE@ WITH_PYTHON_TRUE = @WITH_PYTHON_TRUE@ WITH_WIN32_FALSE = @WITH_WIN32_FALSE@ WITH_WIN32_TRUE = @WITH_WIN32_TRUE@ XGETTEXT = @XGETTEXT@ YACC = @YACC@ Z_CPPFLAGS = @Z_CPPFLAGS@ Z_LIBS = @Z_LIBS@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ ac_ct_WINDRES = @ac_ct_WINDRES@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ gnumeric_autoformatdir = @gnumeric_autoformatdir@ gnumeric_datadir = @gnumeric_datadir@ gnumeric_exec_prefix = @gnumeric_exec_prefix@ gnumeric_gladedir = @gnumeric_gladedir@ gnumeric_icondir = @gnumeric_icondir@ gnumeric_libdir = @gnumeric_libdir@ gnumeric_localedir = @gnumeric_localedir@ gnumeric_plugindir = @gnumeric_plugindir@ gnumeric_prefix = @gnumeric_prefix@ gnumeric_sysconfdir = @gnumeric_sysconfdir@ gnumeric_version = @gnumeric_version@ gnumeric_with_gnome = @gnumeric_with_gnome@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUBDIRS = figures lang = C locale = C entities = \ about-authors.xml \ about-history.xml \ about-license.xml \ analysis-complexNumbers.xml \ analysis-goalseek.xml \ analysis-overview.xml \ analysis-scenarios.xml \ analysis-simulation.xml \ analysis-solver.xml \ analysis-statistical.xml \ appendix-glossary.xml \ appendix-keybindings.xml \ bugs.xml \ compiling.xml \ configuration-localization.xml \ configuration-overview.xml \ configuration-plugins.xml \ configuration-preferences.xml \ configuration-toolbars.xml \ data-commentNlink.xml \ data-delete.xml \ data-entry-advanced.xml \ data-entry-external.xml \ data-entry.xml \ data-format.xml \ data-generate.xml \ data-insert.xml \ data-modify.xml \ data-move-copy.xml \ data-overview.xml \ data-selections.xml \ data-types.xml \ documenting.xml \ extending-functions.xml \ extending-overview.xml \ extending-plugins.xml \ extending-python.xml \ files-formats.xml \ files-email.xml \ files-opening.xml \ files-overview.xml \ files-saving.xml \ files-ssconvert.xml \ files-textopen.xml \ files-textsave.xml \ getting-involved.xml \ graphics-drawings.xml \ graphics-images.xml \ graphics-overview.xml \ graphics-plots.xml \ graphics-widgets.xml \ gui-menus.xml \ gui-mouse.xml \ gui-other-elements.xml \ gui-overview.xml \ gui-toolbars.xml \ installing.xml \ legal.xml \ manual-usage.xml \ morehelp.xml \ printing.xml \ quick-start.xml \ welcome.xml \ workbooks.xml \ worksheets.xml\ functions.xml # functions.xml # added in gnumeric-doc.make figdir = figures docname = gnumeric @WITH_GNOME_TRUE@omffile = gnumeric-$(lang).omf gnumeric_docdir = $(top_srcdir)/doc # ********** Begin of section some packagers may need to modify ********** # This variable (docdir) specifies where the documents should be installed. # This default value should work for most packages. docdir = $(datadir)/gnome/help/$(docname)/$(lang) # ********** You should not have to edit below this line ********** xml_files = $(entities) $(docname).xml # include generated files to simplify installation EXTRA_DIST = $(xml_files) $(omffile) \ func.defs \ functions.xml \ func-header.xml func-footer.xml\ gnumeric.1 ssconvert.1 CLEANFILES = omf_timestamp omf_dest_dir = $(datadir)/omf/@PACKAGE@ scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper subdir = doc/C ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/gnumeric-config.h CONFIG_CLEAN_FILES = DIST_SOURCES = RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ ps-recursive install-info-recursive uninstall-info-recursive \ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive DIST_COMMON = README $(srcdir)/Makefile.in \ $(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/omf.make \ $(top_srcdir)/xmldocs.make ChangeLog Makefile.am DIST_SUBDIRS = $(SUBDIRS) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/C/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ETAGS = etags ETAGSFLAGS = CTAGS = ctags CTAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if (etags --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ else \ include_option=--include; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = ../.. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) $(mkinstalldirs) $(distdir)/../.. $(distdir)/../../doc @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-data-local @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ clean-generic clean-libtool clean-local clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am \ dvi-recursive info info-am info-recursive install install-am \ install-data install-data-am install-data-local \ install-data-recursive install-exec install-exec-am \ install-exec-recursive install-info install-info-am \ install-info-recursive install-man install-recursive \ install-strip installcheck installcheck-am installdirs \ installdirs-am installdirs-recursive maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \ tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-info-recursive uninstall-local uninstall-recursive functions.xml: func.defs $(gnumeric_docdir)/make-func-list.pl func-header.xml func-footer.xml cat $(srcdir)/func-header.xml > $$$$.functmp ; \ perl $(gnumeric_docdir)/make-func-list.pl func.defs >> $$$$.functmp ; \ cat $(srcdir)/func-footer.xml >> $$$$.functmp ; \ if xmllint --format --encode "UTF-8" $$$$.functmp > "$@" ; then \ rm $$$$.functmp; \ fi func.defs: $(top_builddir)/src/gnumeric LC_ALL="$(locale)" ; export LC_ALL ; $(top_builddir)/src/gnumeric --dump-func-defs="$@" # At some point, it may be wise to change to something like this: # scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@ omf: omf_timestamp omf_timestamp: $(omffile) -for file in $(omffile); do \ scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \ done; \ touch omf_timestamp install-data-hook-omf: $(mkinstalldirs) $(DESTDIR)$(omf_dest_dir) for file in $(omffile); do \ $(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \ done -scrollkeeper-update -p $(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir) uninstall-local-omf: -for file in $(srcdir)/*.omf; do \ basefile=`basename $$file`; \ rm -f $(omf_dest_dir)/$$basefile; \ done -rmdir $(omf_dest_dir) -scrollkeeper-update -p $(scrollkeeper_localstate_dir) clean-local-omf: -for file in $(omffile); do \ rm -f $$file.out; \ done all: omf $(docname).xml: $(entities) -ourdir=`pwd`; \ cd $(srcdir); \ cp $(entities) $$ourdir app-dist-hook: if test "$(figdir)"; then \ $(mkinstalldirs) $(distdir)/$(figdir); \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \ done \ fi install-data-local: omf $(mkinstalldirs) $(DESTDIR)$(docdir) for file in $(xml_files); do \ cp $(srcdir)/$$file $(DESTDIR)$(docdir); \ done if test "$(figdir)"; then \ $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ done \ fi install-data-hook: install-data-hook-omf uninstall-local: uninstall-local-doc uninstall-local-omf uninstall-local-doc: -if test "$(figdir)"; then \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ done; \ rmdir $(DESTDIR)$(docdir)/$(figdir); \ fi -for file in $(xml_files); do \ rm -f $(DESTDIR)$(docdir)/$$file; \ done -rmdir $(DESTDIR)$(docdir) clean-local: clean-local-omf # functions.xml # an entity, shipped via xmldocs.make .PHONY : html html : -mkdir -p html xsltproc -o html/ \ --stringparam yelp_chunk_method exslt \ --stringparam yelp_max_chunk_depth 4 \ --stringparam yelp_generate_navbar 1 \ $(datadir)/sgml/docbook/yelp/yelp-customization.xsl $(srcdir)/gnumeric.xml # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: