Template: linux-image-2.6.26-2-versatile/preinst/initrd-2.6.26-2-versatile
Type: text
Description:  You are installing a kernel with an initrd image
 You are attempting to install an initrd kernel image (version 2.6.26-2-versatile) on a
 machine currently running kernel version ${hostversion}.
 .
 I have been unable to find a suitable tool for generating initrd images (I
 looked at the list "${ramdisk}") This will break the installation, unless
 such tools are also being installed right now in the same run. (This
 means, one from the following list ${initrddep})
Description-fr.UTF-8: Installation d'un noyau avec une image disque de démarrage (« initrd »)
 Installation d'une image disque de démarrage (« initrd ») du noyau (version 2.6.26-2-versatile) sur une machine qui utilise un noyau version ${hostversion}.
 .
 Impossible de trouver (dans ${ramdisk}) les outils nécessaires pour créer une image disque de démarrage (« initrd »). L'installation va être interrompue, sauf s'il est prévu d'installer maintenant de tels outils  (parmis ${initrddep}).
Description-ja.UTF-8: initrd イメージによるカーネルのインストール中
 現在 version ${hostversion} のカーネルが稼働しているマシンに、initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしています。
 .
 initrd イメージを生成する一連のツールを検出できませんでした。("${ramdisk}" を検索) そのようなツールが正しくインストールされていない場合、インストールは失敗します。(以下のリストよりひとつインストールしてください。${initrddep})

Template: linux-image-2.6.26-2-versatile/preinst/bootloader-initrd-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Do you want to abort now?
 You are attempting to install an initrd kernel image (version 2.6.26-2-versatile) This
 will not work unless you have configured your boot loader to use initrd.
 (An initrd image is a kernel image that expects to use an INITial Ram Disk
 to mount a minimal root file system into RAM and use that for booting).
 .
 I repeat, You need to configure your boot loader -- please read your
 bootloader documentation for details on how to add initrd images.
 .
 If you have already done so, and you wish to get rid of this message,
 please put
  "do_initrd = Yes"
 in /etc/kernel-img.conf. Note that this is optional, but if you do not,
 you will continue to see this message whenever you install a kernel image
 using initrd.
Description-fr.UTF-8: Voulez-vous abandonner maintenant ?
 L'installation d'une image disque de démarrage (« initrd ») pour le noyau (version 2.6.26-2-versatile) ne fonctionnera que si vous avez configuré le programme de démarrage (« boot loader ») pour qu'il utilise une telle image. Une image disque de démarrage (initrd  =  INITial Ram Disk), est une image du noyau qui monte un disque virtuel dans la mémoire vive avec un système de fichiers racine minimal qui permet de démarrer la machine.
 .
 Il est indispensable de configurer le programme de démarrage. Veuillez consulter sa documentation pour connaître la manière d'y ajouter des images « initrd ».
 .
 Si vous l'avez déjà fait, et que vous ne voulez plus que ce message s'affiche, ajoutez
 « do_initrd = Yes »
 dans /etc/kernel-img.conf. Cela est facultatif, mais permettra d'éviter l'affichage de ce message à chaque installation d'une image de noyau utilisant une image disque de démarrage.
Description-ja.UTF-8: 中止しますか?
 initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、initrd を使用するようブートローダの設定をするまで動作しません。(initrd イメージとは、INITial Ram Disk を使用して、起動時に最小限のルートファイルシステムを RAM にマウントするカーネルイメージです)
 .
 繰り返しますが、ブートローダの設定をする必要があります。initrd イメージの追加方法は、お使いのブートローダのドキュメントをお読みください。
 .
 既に設定しているにもかかわらず、このメッセージが表示される場合、/etc/kernel-img.conf に
  "do_initrd = Yes"
 を設定してください。必ずしも設定しなければならないわけではありませんが、initrd を使用するカーネルをインストールする際に、このメッセージをいつも見ることになります。

Template: linux-image-2.6.26-2-versatile/preinst/lilo-initrd-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Do you want to abort now?
 You are attempting to install an initrd kernel image (version 2.6.26-2-versatile) This
 will not work unless you have configured your boot loader to use initrd.
 (An initrd image is a kernel image that expects to use an INITial Ram Disk
 to mount a minimal root file system into RAM and use that for booting).
 .
 As a reminder, in order to configure LILO, you need to add an
 'initrd=/initrd.img' to the image=/vmlinuz stanza of your /etc/lilo.conf
 .
 I repeat, You need to configure your boot loader -- please read your
 bootloader documentation for details on how to add initrd images.
 .
 If you have already done so, and you wish to get rid of this message,
 please put
  "do_initrd = Yes"
 in /etc/kernel-img.conf. Note that this is optional, but if you do not,
 you will continue to see this message whenever you install a kernel image
 using initrd.
Description-fr.UTF-8: Voulez-vous abandonner maintenant ?
 L'installation d'une image disque de démarrage (« initrd ») pour le noyau (version 2.6.26-2-versatile) ne fonctionnera que si vous avez configuré le programme de démarrage (« boot loader ») pour qu'il utilise une telle image. Une image disque de démarrage (initrd  =  INITial Ram Disk), est une image du noyau qui monte un disque virtuel dans la mémoire vive avec un système de fichiers racine minimal qui permet de démarrer la machine.
 .
 Pour configurer LILO, vous devez ajouter « initrd=/initrd.img » à la section image=/vmlinuz du fichier /etc/lilo.conf
 .
 Il est indispensable de configurer le programme de démarrage. Veuillez consulter sa documentation pour connaître la manière d'y ajouter des images « initrd ».
 .
 Si vous l'avez déjà fait, et que vous ne voulez plus que ce message s'affiche, ajoutez
 « do_initrd = Yes »
 dans /etc/kernel-img.conf. Cela est facultatif, mais permettra d'éviter l'affichage de ce message à chaque installation d'une image de noyau utilisant une image disque de démarrage.
Description-ja.UTF-8: 中止しますか?
 initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、initrd を使用するようブートローダの設定をするまで動作しません。(initrd イメージとは、INITial Ram Disk を使用して、起動時に最小限のルートファイルシステムを RAM にマウントするカーネルイメージです)
 .
 念のため付け加えますが、LILO の設定をするには、/etc/lilo.conf の image=/vmlinuz の続きに 'initrd=/initrd.img' を加える必要があります。
 .
 繰り返しますが、ブートローダの設定をする必要があります。initrd イメージの追加方法は、お使いのブートローダのドキュメントをお読みください。
 .
 既に設定しているにもかかわらず、このメッセージが表示される場合、/etc/kernel-img.conf に
  "do_initrd = Yes"
 を設定してください。必ずしも設定しなければならないわけではありませんが、initrd を使用するカーネルをインストールする際に、このメッセージをいつも見ることになります。

Template: linux-image-2.6.26-2-versatile/preinst/elilo-initrd-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Do you want to abort now?
 You are attempting to install an initrd kernel image (version 2.6.26-2-versatile) This
 will not work unless you have configured your boot loader to use initrd.
 (An initrd image is a kernel image that expects to use an INITial Ram Disk
 to mount a minimal root file system into RAM and use that for booting).
 .
 As a reminder, in order to configure ELILO, you need to add an
 'initrd=/initrd.img' to the image=/vmlinuz stanza of your /etc/elilo.conf
 .
 I repeat, You need to configure your boot loader -- please read your
 bootloader documentation for details on how to add initrd images.
 .
 If you have already done so, and you wish to get rid of this message,
 please put
  "do_initrd = Yes"
 in /etc/kernel-img.conf. Note that this is optional, but if you do not,
 you will continue to see this message whenever you install a kernel
 image using initrd.
Description-fr.UTF-8: Voulez-vous abandonner maintenant ?
 L'installation d'une image disque de démarrage (« initrd ») pour le noyau (version 2.6.26-2-versatile) ne fonctionnera que si vous avez configuré le programme de démarrage (« boot loader ») pour qu'il utilise une telle image. Une image disque de démarrage (initrd  =  INITial Ram Disk), est une image du noyau qui monte un disque virtuel dans la mémoire vive avec un système de fichiers racine minimal qui permet de démarrer la machine.
 .
 Pour configurer ELILO, vous devez ajouter « initrd=/initrd.img » à la section image=/vmlinuz du fichier /etc/elilo.conf
 .
 Il est indispensable de configurer le programme de démarrage. Veuillez consulter sa documentation pour connaître la manière d'y ajouter des images « initrd ».
 .
 Si vous l'avez déjà fait, et que vous ne voulez plus que ce message s'affiche, ajoutez
 « do_initrd = Yes »
 dans /etc/kernel-img.conf. Cela est facultatif, mais permettra d'éviter l'affichage de ce message à chaque installation d'une image de noyau utilisant une image disque de démarrage.
Description-ja.UTF-8: 中止しますか?
 initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、initrd を使用するようブートローダの設定をするまで動作しません。(initrd イメージとは、INITial Ram Disk を使用して、起動時に最小限のルートファイルシステムを RAM にマウントするカーネルイメージです)
 .
 念のため付け加えますが、ELILO の設定をするには、/etc/elilo.conf の image=/vmlinuz の続きに 'initrd=/initrd.img' を加える必要があります。
 .
 繰り返しますが、ブートローダの設定をする必要があります。initrd イメージの追加方法は、お使いのブートローダのドキュメントをお読みください。
 .
 既に設定しているにもかかわらず、このメッセージが表示される場合、/etc/kernel-img.conf に
  "do_initrd = Yes"
 を設定してください。必ずしも設定しなければならないわけではありませんが、initrd を使用するカーネルをインストールする際に、このメッセージをいつも見ることになります。

Template: linux-image-2.6.26-2-versatile/preinst/lilo-has-ramdisk
Type: text
Description:  Lilo has a ramdisk line, which should be commented or removed
 I have found a line
 ${LINE}
 in /etc/lilo.conf that should be removed or commented out, since you are using 
 initrd/initramfs.

Template: linux-image-2.6.26-2-versatile/preinst/abort-install-2.6.26-2-versatile
Type: note
Description:  Aborting install since loading an initrd kernel image
 You are attempting to install an initrd kernel image (version
 2.6.26-2-versatile) This will not work unless you have configured your boot
 loader to use initrd. (An initrd image is a kernel image that expects
 to use an INITial Ram Disk to mount a minimal root file system into
 RAM and use that for booting). Unfortunately, since this Question
 pertaining to this was not shown, and the default action is to abort
 the install. linux-image-2.6.26-2-versatile aborted.
Description-fr.UTF-8: Abandon de l'installation : une image disque de démarrage du noyau est en cours de chargement.
 L'installation d'une image disque de démarrage (« initrd ») pour le noyau (version 2.6.26-2-versatile) ne fonctionnera que si vous avez configuré le programme de démarrage (« boot loader ») pour qu'il utilise une telle image. Une image disque de démarrage (initrd  =  INITial Ram Disk), est une image du noyau qui monte un disque virtuel dans la mémoire vive avec un système de fichiers racine minimal qui permet de démarrer la machine.
 La question correspondante a été omise, et l'action par défaut est alors d'abandonner l'installation. Abandon de linux-image-2.6.26-2-versatile.
Description-ja.UTF-8: initrd カーネルイメージを読み込むためインストールを中止します
 initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、initrd を使用するようブートローダの設定をするまで動作しません。(initrd イメージとは、INITial Ram Disk を使用して、起動時に最小限のルートファイルシステムを RAM にマウントするカーネルイメージです) 申し訳ありませんが、本件に関する質問を表示できず、デフォルトの動作はインストールの中止のため、 linux-image-2.6.26-2-versatile を中止します。


Template: linux-image-2.6.26-2-versatile/preinst/failed-to-move-modules-2.6.26-2-versatile
Type: note
Description:  Failed to move modules out of the way, aborting
 You are attempting to install a kernel image (version 2.6.26-2-versatile)
 However, the directory ${modules_base}/2.6.26-2-versatile/kernel still exists.
 .
 As you have instructed, an attempt was made to move the directory out
 of the way. Unfortunately, There was a problem moving
 ${modules_base}/2.6.26-2-versatile to ${modules_base}/${dest}.
 .
 I suggest you move ${modules_base}/${version} out of the way manually,
 and then try re-installing this image.
 .
 I am aborting.
Description-ja.UTF-8: モジュールの待避に失敗しました。中止します
 カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、ディレクトリ ${modules_base}/2.6.26-2-versatile/kernel が既に存在します。
 .
 指示通りにこのディレクトリを待避しようとしましたが、残念ながら ${modules_base}/2.6.26-2-versatile を ${modules_base}/${dest} へ移動する際に問題が発生しました。
 .
 手動で ${modules_base}/${version} をどこかに待避し、その後このイメージの再インストールをお奨めします。
 .
 中止しています。

Template: linux-image-2.6.26-2-versatile/preinst/overwriting-modules-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Stop install since the kernel-image is already installed?
 You are attempting to install a kernel image (version 2.6.26-2-versatile)
 However, the directory ${modules_base}/2.6.26-2-versatile/kernel still exists.  If this
 directory belongs to a previous ${package} package, and if
 you have deselected some modules, or installed standalone modules
 packages, this could be bad. 
 .
 If ${modules_base}/2.6.26-2-versatile/kernel belongs to an old install of
 ${package}, then this is your last chance to abort the
 installation of this kernel image (nothing has been changed yet).
 .
 If you know what you are doing, and if you feel that this
 image should be installed despite this anomaly, Please answer n to the
 question.
 .
 Otherwise, I suggest you move ${modules_base}/2.6.26-2-versatile/kernel out of the way,
 perhaps to ${modules_base}/2.6.26-2-versatile.kernel.old or something, and then try
 re-installing this image.

Template: linux-image-2.6.26-2-versatile/preinst/abort-overwrite-2.6.26-2-versatile
Type: note
Description:  Aborting install since modules exist
 You are attempting to install an initrd kernel image (version 2.6.26-2-versatile).
 However, the corresponding kernel modules directory exists, and there was
 no permission given to silently delete the modules directory. 
 Unfortunately, since this Question pertaining to this was not shown, and
 the default action is to abort the install. linux-image-2.6.26-2-versatile aborted.
Description-fr.UTF-8: Les modules existent, interruption de l'installation.
 Vous installez une image disque de démarrage (« initrd ») du noyau (version 2.6.26-2-versatile). Toutefois, le répertoire du module du noyau existe, et vous n'avez pas les permissions nécessaires pour le supprimer. La question correspondante a été omise, et l'action par défaut est alors d'abandonner l'installation. Interruption de linux-image-2.6.26-2-versatile.
Description-ja.UTF-8: モジュールが存在するため、インストールを中止します
 initrd カーネルイメージ (version 2.6.26-2-versatile) をインストールしようとしていますが、関連するカーネルモジュールディレクトリが存在し、そのディレクトリを削除する権限がありません。申し訳ありませんが、本件に関する質問を表示できず、デフォルトの動作はインストールの中止のため、 linux-image-2.6.26-2-versatile を中止します。

Template: linux-image-2.6.26-2-versatile/preinst/already-running-this-2.6.26-2-versatile
Type: note
Description:  The kernel version running is the same as the one being installed
 You are attempting to install a kernel version that is the same as the
 version you are currently running (version ${running}). The modules list
 is quite likely to have been changed, and the modules dependency file
 ${modules_base}/2.6.26-2-versatile/modules.dep needs to be re-built. It can not be built
 correctly right now, since the module list for the running kernel are
 likely to be different from the kernel installed. I am creating a new
 modules.dep file, but that may not be correct. It shall be regenerated
 correctly at next reboot.
 .
 I repeat: you have to reboot in order for the modules file to be created
 correctly. Until you reboot, it may be impossible to load some modules.
 Reboot as soon as this install is finished (Do not reboot right now, since
 you may not be able to boot back up until installation is over, but boot
 immediately after). I can not stress that too much. You need to reboot
 soon.
Description-fr.UTF-8: Nouveau noyau de même version
 Le noyau installé est de même version que l'actuel (version ${running}). La liste des modules a très certainement changé, et le fichier des dépendances des modules ${modules_base}/2.6.26-2-versatile/modules.dep doit être recompilé. Il ne pourra pas être compilé correctement maintenant, la liste des modules pour le noyau actuel étant sûrement différente de celle du noyau installé. Un nouveau fichier modules.dep sera créé, mais il sera probablement incorrect. Il sera recréé correctement au prochain redémarrage.
 .
 Vous devrez absolument redémarrer aussitôt l'installation terminée pour que les fichiers des modules soient correctement créés. Jusque là, certains modules peuvent être impossible à charger. Veillez à bien attendre la fin de l'installation, sinon vous risqueriez de ne pas pouvoir redémarrer. Vous devrez ensuite redémarrer dès que possible.
Description-ja.UTF-8: 実行中のカーネルと同じバージョンをインストールしようとしています
 現在動作しているカーネル (version ${running}) と同じバージョンのカーネルをインストールしようとしています。おそらくモジュールリストが変更されているため、モジュールの依存関係ファイル ${modules_base}/2.6.26-2-versatile/modules.dep を再構築する必要があります。動作しているカーネルのモジュールリストと、インストールしようとしているカーネルのモジュールリストに差異があるため、すぐに正しく構築できません。今回新しい modules.dep ファイルを作成しますが、おそらく正しくありません。次回再起動時に正しく再生成する予定です。
 .
 くり返しますが、モジュールファイルを正しく作成するため、適切に再起動しなければなりません。再起動するまで、いくつかのモジュールを読み込めません。インストール終了後すぐに再起動してください (インストールが終了するまで、バックアップが起動できない可能性があるため、今すぐには再起動しないでください。ですが、終了後はただちに再起動してください)。これ以上強制はできませんが、すぐに再起動が必要です。

Template: linux-image-2.6.26-2-versatile/postinst/create-kimage-link-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Create a symbolic link to the current kernel image?
 I notice that you do not have ${kimage} symbolic link. I can create one
 for you, and it shall be updated by newer kernel image packages. This is
 useful if you use a boot loader like lilo.
Description-fr.UTF-8: Faut-il créer un lien symbolique vers l'image actuelle du noyau ?
 Le lien symbolique ${kimage} ne semble pas exister mais peut être créé. Il sera mis à jour par de nouveaux paquets d'images du noyau, ce qui peut être utile si vous utilisez un programme de démarrage tel que LILO.
Description-ja.UTF-8: 現在のカーネルイメージへのシンボリックリンクを作成しますか?
 ${kimage} のシンボリックリンクがありません。これを作成しておき、新しいカーネルイメージパッケージで更新できるようになります。lilo のようなブートローダを使用している場合便利です。

Template: linux-image-2.6.26-2-versatile/postinst/kimage-is-a-directory
Type: note
Description:  Image symbolic link destination is a directory, aborting
 ${kimage} is a directory, which I did not expect.  I am trying to create a
 symbolic link with that name linked to ${image_dest}. Since a directory
 exists here, my assumptions are way off, and I am aborting.
Description-fr.UTF-8: Le lien symbolique de l'image pointe vers un répertoire, abandon.
 ${kimage} ne devrait pas être un répertoire. Il est impossible de créer un lien avec ce nom vers ${image_dest}, où se trouve un répertoire, interruption.
Description-ja.UTF-8: イメージのシンボリックリンクの先がディレクトリです。中止します。
 ${kimage} がディレクトリであることは想定していません。${image_dest} に、そこにリンクするシンボリックリンクを作成しようとしていますが、そこがディレクトリであることは想定していないため、中止します。

Template: linux-image-2.6.26-2-versatile/postinst/depmod-error-2.6.26-2-versatile
Type: boolean
Default: false
Description:  Do you want to abort now?
 This may be benign, (You may have versioned symbol names, for instance).
 Or this could be an error. depmod exited with return value ${exit_value}
 ${SIGNAL}${CORE}. I am deleting the file ${modules_base}/2.6.26-2-versatile/modules.dep.
 However, since depmod is run at install time, we could just defer running
 depmod.
Description-fr.UTF-8: Voulez-vous abandonner maintenant ?
 Cela n'est peut-être pas une erreur (vous avez peut-être modifié la version de certains noms de symboles, par exemple) : depmod s'est arrêté en retournant la valeur ${exit_value} ${SIGNAL}${CORE}. Le fichier ${modules_base}/2.6.26-2-versatile/modules.dep sera supprimé. Toutefois, il est possible de différer l'exécution de depmod, celui-ci étant exécuté au moment de l'installation.
Description-ja.UTF-8: 中止しますか?
 異常ではない (例: バージョン付シンボル名を使用している) か、エラーが発生した可能性があります。depmod は値 ${exit_value} ${SIGNAL} ${CORE} を返して終了しました。${modules_base}/2.6.26-2-versatile/modules.dep を削除していますが、インストール時に depmod を実行しますので、depmod の実行を延期できます。

Template: linux-image-2.6.26-2-versatile/postinst/depmod-error-initrd-2.6.26-2-versatile
Type: boolean
Default: false
Description:  Do you want to abort now?
 This may be benign, (You may have versioned symbol names, for instance).
 Or this could be an error. depmod exited with return value ${exit_value} .
 ${SIGNAL} ${CORE} Since this image uses initrd, I am not deleting the file
 ${modules_base}/2.6.26-2-versatile/modules.dep. However, there is no guarantee that the
 file is valid. I would strongly advice you to either abort and fix the
 errors in depmod, or regenerate the initrd image with a known good
 modules.dep file. I repeat, an initrd kernel image with a bad modules.dep
 shall fail to boot.
Description-fr.UTF-8: Voulez-vous abandonner maintenant ?
 Cela n'est peut-être pas une erreur (vous avez peut-être modifié la version de certains noms de symboles, par exemple) : depmod s'est arrêté en retournant la valeur ${exit_value} ${SIGNAL} ${CORE}. Comme l'image utilise une image disque de démarrage (« initrd »), le fichier ${modules_base}/2.6.26-2-versatile/modules.dep ne sera pas supprimé. Il n'y a toutefois aucune garantie que ce fichier soit valable. Il vous est fortement recommandé d'annuler, et de réparer les erreurs dans depmod, ou de recréer l'image disque de démarrage avec un fichier modules.dep correct. Une image disque de démarrage du noyau avec un fichier modules.dep incorrect risque de ne pas pouvoir démarrer.
Description-ja.UTF-8: 中止しますか?
 異常ではない (例: バージョン付シンボル名を使用している) か、エラーが発生した可能性があります。depmod は値 ${exit_value} ${SIGNAL} ${CORE} を返して終了しました。このイメージは initrd を使用するため、${modules_base}/2.6.26-2-versatile/modules.dep を削除しません。しかし、ファイルが有効であるという保証はありません。中止して depmod のエラーを修正するか、既知の正しい modules.dep ファイルから initrd イメージを再生成するのを、強くお奨めします。くり返しますが、異常な modules.dep を元にした initrd カーネルイメージでは、おそらく起動に失敗します。

Template: linux-image-2.6.26-2-versatile/postinst/old-initrd-link-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Should the old initrd link be deleted now?
 I note that you have an old initrd symbolic link in place. The name of the
 symbolic link is being changed to initrd.img. If the old link is deleted,
 you may have to update the boot loader. If the link is left in place, it
 will point to the wrong image.
Description-fr.UTF-8: Faut-il supprimer l'ancien lien « initrd » maintenant ?
 Un ancien lien symbolique « initrd » est présent, et sera renommé initrd.img. Si cet ancien lien est supprimé, vous devrez mettre à jour le programme de démarrage (« boot loader »). S'il est conservé, il pointera vers la mauvaise image.
Description-ja.UTF-8: 古い initrd のリンクをすぐに削除してもよろしいですか?
 古い initrd シンボリックリンクが存在します。シンボリックリンクの名前は initrd.img に変更されました。古いシンボリックリンクを削除する場合、ブートローダを更新する必要があると思われます。シンボリックリンクを残しておく場合、誤ったイメージを指し示している可能性があります。

Template: linux-image-2.6.26-2-versatile/postinst/old-dir-initrd-link-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Should the old initrd link be deleted now?
 I note that you have an old ${image_dir}/initrd symbolic link in place. 
 The location of the symbolic link is now the same location as the kernel
 image symbolic links, namely, in ${image_dest}.  If the old link is
 deleted, you may have to update the boot loader. If the link is left in
 place, it will point to the wrong image.
Description-fr.UTF-8: Faut-il supprimer l'ancien lien « initrd » maintenant ?
 Un ancien lien symbolique ${image_dir}/initrd est présent. Il est maintenant au même emplacement que le lien symbolique de l'image du noyau, c'est-à-dire dans ${image_dest}. Si cet ancien lien est supprimé, vous devrez mettre à jour le programme de démarrage (« boot loader »). S'il est conservé, il pointera vers la mauvaise image.
Description-ja.UTF-8: 古い initrd のリンクをすぐに削除してもよろしいですか?
 古い ${image_dir}/initrd シンボリックリンクが存在します。シンボリックリンクの場所はカーネルイメージのシンボリックリンクと同じ、${image_dest} になります。古いシンボリックリンクを削除する場合、ブートローダを更新する必要があると思われます。シンボリックリンクを残しておく場合、誤ったイメージを指し示している可能性があります。

Template: linux-image-2.6.26-2-versatile/postinst/old-system-map-link-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Should the old /System.map link be deleted now?
 You have /System.map symbolic link. These were installed by ancient kernel
 image packages. However, all the programs that look at the information in
 the map files (including top, ps, and klogd) also will look at
 /boot/System.map-2.6.26-2-versatile Having the symbolic link in / is technically
 detrimental (apart from cluttering up /); many programs, though looking in
 /boot, still allow /System.map to override. If you install multiple
 kernels on this machine, then the /System.map symbolic link only applies
 to one such kernel, for all other choices the symbols loaded will be
 wrong. Not having /System.map at all prevents this.
Description-fr.UTF-8: Faut-il supprimer l'ancien lien /System.map maintenant ?
 Un lien symbolique /System.map est présent. Il a été installé par un ancien paquet d'image du noyau. Toutefois, tous les programmes qui obtiennent des informations des fichiers de correspondances (dont top, ps et klogd) en obtiennent aussi de /boot/System.map-2.6.26-2-versatile. La présence de ce lien symbolique dans le répertoire racine est déconseillée (pas seulement à cause de la place occupée). Beaucoup de programmes, même s'ils utilisent /boot, utilisent /System.map en premier lieu. Si vous installez plusieurs noyaux sur cette machine, le lien symbolique /System.map ne correspondra qu'à un seul d'entre eux. Pour tous les autres, les symboles chargés seront incorrects. Pour cette raison, il est conseillé de supprimer /System.map.
Description-ja.UTF-8: 古い /System.map のリンクをすぐに削除してもよろしいですか?
 /System.map シンボリックリンクがあります。これはいにしえのカーネルイメージパッケージによってインストールされたものです。しかし、この map ファイルの情報を参照する全プログラム (top, ps, klogd を含む) は /boot/System.map-2.6.26-2-versatile も参照します。/ にシンボリックリンクがあるのは、(/ が散らかるのはさておき) 技術的に有害です。たくさんのプログラムが /boot を参照するにも関わらず、未だに /System.map を上書きできるようにしています。複数のカーネルをインストールした場合、/System.map シンボリックリンクはあるひとつのカーネルにしか適用できず、その他のカーネルではシンボルの読み込みに失敗します。どんな /System.map もこれを防げません。

Template: shared/kernel-image/really-run-bootloader
Type: boolean
Default: true
Description: Run the default bootloader?
 The default boot loader for this architecture is ${loader}, which is
 present. However, you have not explicitly requested the boot loader
 ${loader} should be run in the configuration file /etc/kernel-img.conf, and
 you seem to have grub installed, and have set a postinst hook (which is
 used to hook in grub after a kernel image installation). At this point, it
 is perfectly likely that this system is using grub as a bootloader, and
 not the builtin default of ${loader}. If that is the case, running ${loader}
 instead of grub might make the machine unbootable. I need to know whether
 to run the default bootloader ${loader}, or just let the postinst hook
 script update grub later. The default is to run ${loader}.
Description-ja.UTF-8: デフォルトのブートローダを実行しますか?
 このアーキテクチャのデフォルトブートローダは ${loader} で存在しています。しかし、設定ファイル /etc/kernel-img.conf で、ブートローダ ${loader} を実行するように、明示していません。また、grub をインストールしようとしており、(カーネルイメージインストール後に grub のフックで使用する) postinst フックが設定されています。これにより、このシステムではブートローダに grub を用い、${loader} の組み込みのデフォルトを使用しないと、確実に見なせます。この場合、grub の代わりに ${loader} を実行するとマシンが起動しなくなる可能性があります。ここでは、デフォルトブートローダである ${loader} を実行するか、grub の更新後に postinst フックスクリプトを後で実行するかを知る必要があります。デフォルトでは ${loader} を実行します。

Template: linux-image-2.6.26-2-versatile/postinst/bootloader-test-error-2.6.26-2-versatile
Type: note
Description:  Error running the boot loader in test mode.
 An error occurred while running the boot loader ${loader} in test mode. A
 log is available in ${temp_file_name}. Please edit /etc/${loader}.conf
 manually and re-run ${loader}, or make other arrangements to boot your
 machine.
Description-fr.UTF-8: Erreur à l'exécution du programme de démarrage (« boot loader ») en mode test.
 Une erreur s'est produite lors de l'exécution du programme de démarrage (« boot loader ») ${loader} en mode test. Un journal est disponible dans le fichier ${temp_file_name}. Veuillez modifier /etc/${loader}.conf vous-même et relancer ${loader}, ou effectuer d'autres modifications pour pouvoir démarrer la machine.
Description-ja.UTF-8: ブートローダ ${loader} の実行中にエラーが発生しました。ログは ${temp_file_name} にあります。/etc/${loader}.conf を手で編集し、${loader} を再実行してください。もしくは、他の方法でマシンを起動してください。
 テストモードでの、ブートローダ ${loader} の実行中にエラーが発生しました。ログは ${temp_file_name} にあります。/etc/${loader}.conf を手で編集し、${loader} を再実行してください。もしくは、他の方法でマシンを起動してください。

Template: linux-image-2.6.26-2-versatile/postinst/bootloader-error-2.6.26-2-versatile
Type: note
Description:  Error running the boot loader in test mode.
 An error occurred while running the boot loader ${loader}. A log is
 available in ${temp_file_name}. Please edit /etc/${loader}.conf manually
 and re-run ${loader}, or make other arrangements to boot your machine.
Description-fr.UTF-8: Erreur à l'exécution du programme de démarrage (« boot loader ») en mode test.
 Une erreur s'est produite lors de l'exécution du programme de démarrage (« boot loader ») ${loader}. Un journal est disponible dans le fichier ${temp_file_name}. Veuillez modifier /etc/${loader}.conf vous-même et relancer ${loader}, ou effectuer d'autres modifications pour pouvoir démarrer la machine.
Description-ja.UTF-8: ブートローダ ${loader} の実行中にエラーが発生しました。ログは ${temp_file_name} にあります。/etc/${loader}.conf を手で編集し、${loader} を再実行してください。もしくは、他の方法でマシンを起動してください。
 ブートローダ ${loader} の実行中にエラーが発生しました。ログは ${temp_file_name} にあります。/etc/${loader}.conf を手で編集し、${loader} を再実行してください。もしくは他の方法で起動するようにしてください。

Template: linux-image-2.6.26-2-versatile/prerm/removing-running-kernel-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Do you want to abort removal now?
 You are running a kernel (version ${running}) and attempting to remove the
 same version. This is a potentially disastrous action. Not only will
 /boot/vmlinuz-${running} be removed, making it impossible to boot it, (you
 will have to take action to change your boot loader to boot a new kernel),
 it will also remove all modules under the directory
 /lib/modules/${running}. Just having a copy of the kernel image is not
 enough, you will have to replace the modules too.
 .
 I repeat, this is very dangerous. If at all in doubt, answer Yes. If you
 know exactly what you are doing, and are prepared to hose your system,
 then answer No.
Description-fr.UTF-8: Voulez-vous abandonner la suppression maintenant ?
 La version actuelle du noyau est la même que celle que vous essayez de supprimer. Cette action est extrêmement risquée. Non seulement /boot/vmlinuz-${running} va être supprimé, le rendant impossible à démarrer (vous devrez faire le nécessaire pour modifier votre programme de démarrage pour lancer un autre noyau), mais les modules présents dans /lib/modules/${running} seront aussi supprimés. Avoir une copie de l'image du noyau ne sera pas suffisant, il faudra aussi remplacer les modules.
 .
 Cette action est très dangereuse. Dans le doute, interrompez l'installation. Vous ne devriez poursuivre que si vous savez exactement ce que vous faites.
Description-ja.UTF-8: すぐに削除を中止しますか?
 カーネル (version ${running}) が実行中で、そのバージョンを削除しようとしています。これは本質的に惨事を招く行為です。/boot/vmlinuz-${running} が削除されるだけでなく、起動不可になります(ブートローダの設定を変更し、新しいカーネルで起動するようにしなければなりません)。/lib/modules/${running} ディレクトリにある全モジュールも削除してしまいます。カーネルイメージのコピーを取っておくのでは不十分で、モジュールの置き換えもする必要があります。
 .
 くり返しますが、これは非常に危険です。よく分からない場合は「はい」と答えてください。何をしようとしているかを理解していて、システムに何が起きてもいい準備ができている場合、「いいえ」と答えてください。

Template: linux-image-2.6.26-2-versatile/prerm/would-invalidate-boot-loader-2.6.26-2-versatile
Type: boolean
Default: true
Description:  Do you want to abort removal now?
 You have a valid /etc/${loader}.conf file that mentions ${kimage}-2.6.26-2-versatile. 
 Removing linux-image-2.6.26-2-versatile would invalidate that file. (you will have to edit
 /etc/${loader}.conf or re-target symbolic links mentioned there
 (typically, /vmlinuz and /vmlinuz.old) to not refer to ${kimage}-2.6.26-2-versatile and
 will have to re-run ${loader}).
 .
 I repeat: you shall have to make changes to your boot loader setup and
 will have to re-run ${loader}.
Description-fr.UTF-8: Voulez-vous abandonner la suppression maintenant ?
 Le fichier /etc/${loader}.conf fait référence à ${kimage}-2.6.26-2-versatile. La suppression de linux-image-2.6.26-2-versatile rendrait ce fichier incorrect. Vous devrez modifier /etc/${loader}.conf ou rediriger les liens symboliques qui y sont mentionnés (habituellement /vmlinuz et /vmlinuz.old) pour qu'il ne fasse pas référence à ${kimage}-2.6.26-2-versatile, puis redémarrer ${loader}).
 .
 Vous devrez vraiment modifier la configuration de votre programme de démarrage et relancer ${loader}.
Description-ja.UTF-8: すぐに削除を中止しますか?
 ${kimage}-2.6.26-2-versatile に関する有効な /etc/${loader}.conf ファイルがあります。linux-image-2.6.26-2-versatile を削除すると、このファイルは無効になります。(/etc/${loader}.conf を編集したりシンボリックリンクの先 (大抵 /vmlinuz を /vmlinuz.old に) を再定義したりして、${kimage}-2.6.26-2-versatile が参照されないようにし、${loader} を再実行する必要があります)
 .
 くり返しますが、ブートローダの設定を見なおし、${loader} を再実行する必要があると思われます。
